Precautions For Reaming Bit Lubrication

• Posted by drilling kaiqiu June 23, 2021 - Filed in Business - #Reaming Bit  #Extension Drilling Tools  - 191 views

  Reaming Bit lubrication methods can be divided into: manual application, oil supply pump, enclosed oil bath, oil gun and oil cup pressure oil injection, etc. Let us take a closer look.
  Manual lubrication is a simple method of lubrication. The riser, pulley, wheel, rope, chain, open gear, glass slide, etc. of the drilling machine are all injected manually. Manual oil change tools include oil gun, oil cup, oil brush, scraper, etc. The water well drilling rig must be injected into the lubrication system in time, and the following points must be paid attention to.
  1. When gears, chains, sprockets and other parts come into contact with oil or mud, please apply grease, disassemble and clean, and then remove the oil.
  2. After confirming the oil, the oil will be approved to enter the periphery of the tool magazine. Do not move the drilling machine, and then pay attention when you cannot input.
  3. When applying oil on the steel wire rope, please heat the oil to prevent it from entering the steel wire core.
  4. Lubricating oil must be pure, and it is strictly prohibited to mix in lubricating oil.
  5. Lubricating oil is easy to harden in winter, and a small amount of mechanical oil is evenly mixed.
  6. The water well drilling rig can lift the oil gun through the screw piston, the screw piston is high, and the oil gun and the oil gun are reliable. The walking and elevator of the drilling rig use a closed oil bath, and the rotating gear is lubricated by an oil pump. All measures to reduce the wear between the friction surface and the friction are called lubrication.
  The impact of lubrication on the mechanical equipment of water well drilling rigs has several aspects:
  1. Reduce friction: This is the main function of lubrication. Due to the presence of the lubricant film, it prevents direct contact with the metal surface of the conveyor. Direct contact with the conveyor. This reduces magic wetting and wear.
  2. Cooling and heat dissipation: In high-speed rotating parts, all heat is generated due to friction. If you don't try, it will continue to heat up and cause the machine to burn.
  3. Anti-rust: The outdoor work of water well drilling rigs is often beaten by wind and rain. Rusty metal parts. For example, grease on well-coated metal surfaces can prevent rust and prolong service life.
  4. Sealing and blocking: Use wool felt to seal the root of the board and the end cover of the bearing to effectively seal the dust in the oil immersion.
  5. Cleaning dirt: In the circulating diluent oil lubrication system, the liquid oil is continuously circulated to wash the surface, and it can gradually flow and successfully take the surface out. Extension Drilling Tools rotate the reducer to lift the oil bath gear reducer.