Introduction To Reaming Bit

• Posted by drilling kaiqiu July 28, 2021 - Filed in Business - #Reaming Bit  #Extension Drilling Tools  - 199 views

         Because the parts of the new machine have just been started, the appearance is rough, and the parts are not so smooth during operation. The metal chips that fall off will continue to rub at the joints, so the parts during the running-in period are very prone to wear. Yes, running at full power for a long time at this stage can easily cause damage to the parts and cause the new machine to malfunction. The frequent failures of the Reaming Bit that many construction teams have just bought are caused by working at full load for a long time during the running-in period. For the newly purchased highway guardrail piling machine, it must not be operated at full power or even overload. It is best to keep the work in accordance with 60% of the workload during normal use to avoid heat caused by the machine's long-term continuous work. In addition, be sure to check the instrument panel, the amount of various oils, and the sealing performance of each system before starting work every day, and add grease or lubricating oil to the parts that need to be lubricated. Run-in period For Extension Drilling Tools, if excessive damage is caused to these parts during the run-in period, the incidence of later failures will be greatly increased, and a good run-in period will reduce a lot of unnecessary in the future construction. trouble.