The difference between UTP Cat5 Patch Cord Cables Suppliers

• Posted by datacable aoyipu November 14, 2021 - Filed in Other - #UTP Cat5 Patch Cord Cables  #UTP Cat5 Patch Cord Cables Suppliers  #UTP Cat5 Patch Cord Cables Manufacturers  - 88 views

  Cat 6 and Cat 5 Ethernet cables

  There are several similarities and differences between these two types of cables, and you need to understand them before making a decision.

  Bandwidth: UTP Cat5 Patch Cord Cables Suppliers' Cat 5 Ethernet cables have been used in computer networks for many years. Cat 5e is a popular variant of the Cat 5 cable used since 2001. In these two variants, Cat 5 cable can support speeds up to 10/100 Mbs at 100MHz bandwidth, while Cat 5e can support up to 100/1000 Mbs bandwidth at 350 Hz. These cables are also used to transmit video and telephone signals. Cat 5 and Cat 5e Ethernet cables are unshielded. Cat 6 Ethernet cables can support speeds up to 1000 Mbps at 250 Hz bandwidth. The better performance of Cat 6 cable makes it an ideal choice for applications that require high-speed data transmission.

  Distortion: Among many factors, the performance of the cable is affected by distortion. The distance between twists is called the pitch. If you notice, every four twisted pairs in a Cat 5 cable will have a different but precise spacing. These spacings help minimize crosstalk. Cat 5e cables may have 1.5 to 2 twists per cm. In contrast, Cat 6 Ethernet cables are tightly wound, with two or more twists per centimeter.

  Cable diameter: In data centers, airflow is an important consideration. Since there are many cables in the wiring area, airflow will be reduced. This is where the cable diameter can come into play. Cat 5 Ethernet cables have a diameter of 0.204 inches, while Cat 6 Ethernet cables have a slightly larger diameter of 0.250 inches.

  Maximum cable length: For cable 5, the maximum cable length for 10BASE-T applications is 100 meters. This length runs between two active devices, with a 90-meter-long solid core permanent wiring and two twisted jumpers and two connectors with a 5-meter length at each end. For Cable 6, the maximum cable length for 10/100/1000BASE-T applications is 100 meters. However, for 10GBase-T applications, the unshielded cable length for Cat 6 cables is 55 meters and the length for Cat 6a cables is 100 meters.

  End piece: Wholesale UTP CAT5E Cables Suppliers Category 5 and Category 6 cables use the same plug to connect to their final destination, which can be a modem or a patch panel. The cable uses RJ-45 plugs.